Please take a moment to review the following Application Conditions to ensure a perfect press every time. Get into the habit of preheating the bottom platen for 15 to 30 seconds before application of the first transfer. Adhesives tend to flow towards heat and if the bottom platen is cold it will flow towards the top platen. Every machine is not calibrated the same so the following application conditions are recommendations as good starting points.
Note: Preheat the bottom platen for 15 to 30 seconds before application of the first transfer.
Application conditions: (These are recommendations, your heat press settings may vary)
Polypropylene– 250°F to 270°F, 5 to 7 seconds, Peel Hot to Warm and Medium to Firm pressure.
Nylon- 305°F to 320°F, 5 to 7 seconds, Peel Warm to Cold and Medium Pressure
Polyester and Blends- 315°F to 330°F, 5 to 10 seconds, Peel Warm to Cold and Medium Pressure.
Cotton – 315°F to 350°F, 5 to 10 seconds, Peel Warm to Cold and Medium Pressure
If you have any questions or comments on the application conditions please contact us at:
[email protected]